Cartridge Holder, 7.8 x 10 mm
Part Number: 186000708
Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...
Cartridge Holder, 7.8 x 10 mm
----
Buy Now
Chemistry Socks
Part Number: 600001730
Show the world your love of chemistry with these fun periodic table of elements socks. Great for work or a special event this summer!
Chemistry Socks
----
Buy Now
Cartridge Holder, 19 x10 mm
Part Number: 186000709
Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...
Cartridge Holder, 19 x10 mm
----
Buy Now
O-rings for 10 x10 mm cartridge holder, 2 pkg
Part Number: 700001436
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
O-rings for 10 x10 mm cartridge holder, 2 pkg
----
Buy Now
O-RING PKG 2/PK
Part Number: WAT097954
O-RING PKG 2/PK
----
Buy Now
Cartridge Column Holder for 2.1 x 20 mm Cartridge Column
Part Number: 186000262
Cartridge Column Holder for 2.1 x 20 mm Cartridge Column
----
Buy Now
PrepPak® 1000 Module
Part Number: WAT089592
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
PrepPak® 1000 Module
----
Buy Now
O-rings for 19 x 10mm Cartridge Holder, 2 pkg
Part Number: 700001020
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
O-rings for 19 x 10mm Cartridge Holder, 2 pkg
----
Buy Now
O-Ring, Filling port, 10/Pkg
Part Number: WAT005129
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
O-Ring, Filling port, 10/Pkg
----
Buy Now
Kalrez Washer, 10/pk
Part Number: WAT005147
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
Kalrez Washer, 10/pk
----
Buy Now
Holder kit for Cartridge and Guard Columns
Part Number: WAT046910
The Sentry guard column holder is required for use with Sentry guard columns that have an I.D. of 3.0, 3.9, and 4.6 mm and a length of 20 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical col...
Holder kit for Cartridge and Guard Columns
----
Buy Now
O-Ring Buna-N 2-030, (RF Feed Thru)
Part Number: WAT022453
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
O-Ring Buna-N 2-030, (RF Feed Thru)
----
Buy Now
Check Valve, RCM
Part Number: WAT082888
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
Check Valve, RCM
----
Buy Now
O-Ring, RCM, 4/pkg
Part Number: WAT015797
This small O-Ring is used for the connectors on the RCM 8 X 10 Cartridge Holder when using normal phase chemistry.
O-Ring, RCM, 4/pkg
----
Buy Now
2.1x10mm Holder Kit for Cartridges and Guard Columns
Part Number: WAT097958
The Sentry guard column holder is required for use with Sentry guard columns that have a 2.1 mm I.D. and a length of 10 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical column. The Sentry gu...
2.1x10mm Holder Kit for Cartridges and Guard Columns
----
Buy Now
O-ring, 19mm ID Prep Guard Holder, 2/Pk
Part Number: 186008824
Replacement O-rings for the 19x10mm Prep Guard Holder (Part Number 186008745). These o-rings are considered both SFC and LC mobile phase compatible.
O-ring, 19mm ID Prep Guard Holder, 2/Pk
----
Buy Now
2.1 mm Cartridge End Connector Kit
Part Number: 700000117
2.1 mm Cartridge End Connector Kit
----
Buy Now
ConnectorTube Assy. non-metallic
Part Number: WAT088919
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
ConnectorTube Assy. non-metallic
----
Buy Now
Connector Assy, SS
Part Number: WAT082892
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
Connector Assy, SS
----
Buy Now
Integrated Guard Holder
Part Number: WAT046905
Integrated Guard Holder
----
Buy Now
Cartridge Holder PKG 10 x10 mm
Part Number: 289000779
Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...
Cartridge Holder PKG 10 x10 mm
----
Buy Now
O-Ring Kit, 2/pkg
Part Number: 186007012
O-Ring Kit, 2/pkg
----
Buy Now
PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg
Part Number: WAT005137
Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the...
PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg
----
Buy Now
O-rings for 7.8 x 10mm cartridge holder, 2 pkg
Part Number: 700001019
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
O-rings for 7.8 x 10mm cartridge holder, 2 pkg
----
Buy Now
GUARD-PAK HOLDER
Part Number: WAT088141
GUARD-PAK HOLDER
----
Buy Now
Working in Academia?
